Busca Cinta Anticorrosión, Cinta De Polipropileno, Cinta Para Envolver Tuberías en el directorio Industry, Reliable fabricante / proveedor / fábrica de China

Buzón de Consultas (0)

Las últimas alertas sobre productos

Cinta de membrana de malla de polipropileno anticorrosivo

Información básica

Modelo:  T500

Descripción del producto

Modelo N °: T500 Marca registrada: XUNDA Origen: Jining City, China Material: PP Especificación: SGS DVGW EN23068 AWWA C209 C214 Código HS: 39191099 Cinta de membrana de malla de polipropileno (T 500) \ n IDescripción \ n La cinta de menbrana de malla de polipropileno T 500 es cinta adhesiva en frío para tuberías metálicas y trabajos de impermeabilización contra los malos tiempos al aire libre. \ n \ n Anticorrosive Polypropylene Mesh Membrane Tape \ n \ n IIStructures \ n Respaldo: Tejido de tela PP, \ n Capa adhesiva: goma butílica Compuesto bituminoso \ n III Usos \ n \ n \ n
Waterproofing- Pipelines protection
-Waterproofing membrane for basements,substructures and flat deck applications. plazas, bridge, vehicular traffic structures, or parking decks overlaid with an asphalt concrete wearing course.
-Tough, high performance waterproof membrane for critical substructures and civil engineering works.
-Provides a vapor and waterproof membrane to water excluding structures and protects concrete from attack by aggressive ground salts.
-Protection for wall ,floor, roof, corner, basement etc. to against from attack by bad weather, rain, acid alkaline salt
_ Weld joints
_ Bends
_ Fittings
_ Bare pipe lengths
_ Pipe rehab and repair
-Bare pipe length
 
\ n IV Características \ n \ n \ n
Waterproofing- Pipes protection
-Cold applied.
-High resistance  to bad weather environment
-Good performance itself to keep dry
-Easily application &installation.
-Suitable for a wide range of temperatures
- Compatible primers
-Safe,clean
_ Cold applied
_ Excellent self adhesion to pipe
_ Flexibility provides extra protection at vulnerable areas
_ Excellent conformability and consistent uniform thickness
_ Easily applied with no special equipment
_ Compatible with common pipe coatings
_ Excellent resistance to cathodicdisbonding
 
\ n \ n \ n \ n \ n \ n \ n \ n \ n V Datos técnicos \ n \ n
PHYSICAL PROPERPTIES UNIT TEST METHOD TYPICAL VALUES
Total thickness mil ASTM D 1000 40mils 50mils 60mils 65mils
Tensile Strength lb/in ASTM D 1000 30(5kg/cm) 35(6.3kg/cm) 39(7kg/cm) 42(7.5kg/cm)
Length

25mtrs 20mtrs 15mtrs 10mtrs
Width

2",4",6",9"
Peel adhesion          To primed pipe oz/in ASTM D 1000 269(3kg/cm) 296(3.3kg/cm) 314 (3.5kg/cm) 340(3.8kg/cm)
        To backing oz/in ASTM D 1000 90(1kg/cm) 90(1kg/cm) 117(1.3kg/cm) 135(1.5kg/cm)
Dielectric Strength KV/mm ASTM D 1000 42 42.6 43 43.8
Volume Resistivity ohm·m ASTM D 257 2.5 X 1012 2.5 X 1012 2.5 X 1012 2.5 X 1012
Water Vapor Transmission Rate g/ m2 /24h ASTM E 96 0.06 0.05 0.03 0.02
Water Absorptivity % ASTM D 570 0.1 0.1 0.1 0.1
Application Temperature °F
-31-+160  (-35-+70ºC)
Max service temperature °F
-40-+176  (-40-+80ºC)

orte

Grupos de Producto : Cinta de polipropileno

Enviar a esta empresa
  • *Tema:
  • a:

  • *Mensajes:
    Su mensaje debe ser entre 20 a 8.000 caracteres